Knife hacks ??#shorts #shortfeed #treanding #shortvideo #ytshortsindia #youtubeshorts

Knife Hacks ??#shorts #shortfeed #trending #shortvideo #ytshortsindia #youtubeshorts

You can sharpen any old knife at home within 30 seconds and make it like new. Follow this guide to create an easy, DIY knife sharpener with simple materials.

Materials Needed:

• Motor worth Rs. 100
• Lighter
• Plastic bottle
• Old charger wire
• Injection (syringe)
• Glue
• Knife

Instructions:

1. Preparing the Motor and Lighter:

   • Buy a motor worth Rs. 100.
   • Open the top lid of a lighter to reveal a circular component inside.
   • Remove this circular component and fix it tightly onto the motor by knocking it into place.

2. Preparing the Plastic Bottle:

   • Take a plastic bottle and cut off the front part.
   • Make a hole in the middle of the bottle lid.
   • Remove the lid and attach the remaining part of the bottle.
   • Stick the motor into the side hole of the bottle in this manner.

3. Setting Up the Charger Wire:

   • Take the wire of an old charger.
   • Attach the wires to both terminals of the motor.
   • Fit the bottle cap back onto the bottle piece and make a small cut on its side to run the wire through.

4. Preparing the Injection:

   • Remove the plunger from an old syringe.
   • Cut the syringe in the middle.
   • Mark and cut a reverse slot onto the syringe piece with a knife or any sharp tool.
   • Stick this piece onto the bottle lid with glue.

5. Sharpening the Knife:

   • Connect the assembled motor to the charger and turn it on to start the motor's rotation.
   • Take the knife you want to sharpen and rub it against the rotating component.
   • Within 30 seconds, the knife will be as sharp as new.

Keywords

• DIY knife sharpener
• Motor
• Plastic bottle
• Old charger
• Injection
• Knife sharpening

FAQ

Q1: What materials do I need for this DIY knife sharpener? A1: You need a motor (Rs. 100), a lighter, a plastic bottle, an old charger wire, an injection, and some glue.

Q2: How do I attach the lighter’s circular component to the motor? A2: You can attach it by knocking it tightly onto the motor.

Q3: Where do I fix the motor on the plastic bottle? A3: Make a hole on the side of the bottle and stick the motor through it.

Q4: How do I connect the motor to the power supply? A4: Use the wire from an old charger to connect to both terminals of the motor.

Q5: How long will it take to sharpen a knife with this DIY setup? A5: It only takes around 30 seconds to sharpen the knife.

Q6: Is it safe to make and use this DIY knife sharpener? A6: Ensure that all connections are secure and take necessary precautions while using the motorized sharpener to avoid any accidents.

This detailed guide ensures that with minimal cost and effort, you can bring your old, dull knives back to life in a matter of seconds!