Powerful 220v generator #generator #free-generator #short #youtubeshorts #ytshorts #video #viral

Powerful 220v Generator #generator #free-generator #short #youtubeshorts #ytshorts #video #viral

First of all, you have to take a transformer. Strip the secondary wire of the transformer and bend it in the specified manner. Connect it to the terminal on the front of the transformer, ensuring a good grip on it. Next, we will do soldering on both the terminals.

After that, we need to take a piece of MDF board and tighten the transformer with the help of this group in such a way that the transformer does not move. After this, we will need a power board. Ensure that the connection of the transformer is done properly.

Next, tighten the wire securely by tightening the screw and then put a cover on top of it. After the cover is in place, make four holes on its back side. Fix the screws tightly.

Finally, set the power board properly with the help of glue. We then take a magnet and fix it in the motor with the help of a screw. This completes the setup. If you want to know more details or need a specific part, please comment below.

Above is the guide as seen in the video.

Keywords

1. Transformer
2. Secondary wire
3. Soldering
4. MDF board
5. Power board
6. Connection
7. Tightening
8. Cover
9. Magnet
10. Motor

FAQ

Q1: What type of board should I use for securing the transformer? A1: You should use a piece of MDF board to tighten the transformer securely.

Q2: How should the connection of the transformer be done? A2: The connection should be done carefully and securely to ensure proper functioning.

Q3: What is the purpose of tightening the wire and adding a cover? A3: Tightening the wire ensures a secure connection, and the cover protects the components.

Q4: How do I fix the magnet into the motor? A4: You fix the magnet into the motor with the help of a screw.

Q5: What tools will I need for this project? A5: You will need a transformer, soldering tools, MDF board, power board, screws, screwdrivers, and glue.